Table of Contents
Advertisement
INSTALLING PICTURETEL LIVE100 HARDWARE
Optional Devices
(connector labeled VGA)
3-16
You can connect a second FlipCam camera and a VCR or other video
source to your PictureTel Live100.
To connect audio input and output devices to the Live100
components, you need an optional Auxiliary Audio cable (refer to
Appendix I to order from PictureTel). To use a VCR for recording a
videoconference, you need a third-party scan converter.
The figure below shows the location of the sockets on the Live100
boards that you use to connect optional devices.
To the monitor
Main FlipCam
Audio
VGA Video
Communications
board
board
8A
VCR or other aux. video device
Second FlipCam
ISDN
VCR/Audio
Aux. Speaker
& Mic.
Speakerphone
(connects to VCR's video out)
7
Advertisement
Table of Contents
