Table of Contents
Advertisement
INSTALLING PICTURETEL LIVE100 HARDWARE
Installing the
Audio
Communications
Board
3-6
To install the Audio Communications board, follow these steps:
1. Remove the Audio Communications board from its plastic
antistatic package.
Note: The default switch settings are explained in Appendix B,
Changing Settings on the Live100 Boards.
The Audio Communications board can be damaged by
static discharge. To equalize static charge, ground yourself
by touching the metal back panel of your PC.
You can identify the Audio Communcations board by the MVIP
connector on the top edge.
2. Insert the board into the expansion slot adjacent to the VGA Video
board.
Make sure the board is securely seated in its slot.
3. Secure the board by replacing the screw that holds the back plate.
Caution
Interboard
MVIP connector
connector
for optional boards
PC's expansion slot
Back plate
Insert into the
Advertisement
Table of Contents
