Table of Contents
Advertisement
Installing the
Live50 Board
Inserting the Live50 Board
This section tells you how to install the Live50 board.
Note: For BABT (British Approvals Board for
Telecommunications - United Kingdom) and AUSTEL
(Australia) requirements for installing the Live50 board,
refer to Appendix H.
To insert the Live50 board:
1. Power off your PC.
For instructions, see your PC documentation.
Do not connect or disconnect Live50 components when
your PC is on. Doing so may damage the Live50 hardware.
2. Locate an available ISA or EISA expansion slot next to the VGA
board, or locate the next available slot.
3. Remove the back plate of the expansion slot and save the screw.
4. Remove the Live50 board from its plastic antistatic package.
The Live50 board can be damaged by static discharge.
To equalize static charge, ground yourself by touching the
metal back panel of your PC.
Installing the Live50 Board
Caution
Caution
2-5
Advertisement
Table of Contents
