Table of Contents
Advertisement
Checking and
Configuring an
EISA-Bus PC
If your PC has an EISA bus, use the EISA configuration utility
supplied by the PC manufacturer to do the following:
1. Check your current PC settings for conflicts with the settings for
IRQ, I/O port addresses, and shared memory space you set in the
PictureTel Live Setup program.
If you find any conflicts, locate and write down the available
settings here:
Available IRQ: ______
Available I/O port address: __________________
Available shared memory space address:
__________________
2. If you found any conflicts, change the settings by running the
PictureTel Live Setup program again and entering the new
settings.
3. Configure your PC for the Live50 and Live100 Audio
Communications board.
Run your EISA configuration utility to configure your PC for the
Audio Communications board, using these options:
Manually configure an ISA board
!
Add a board without a .CFG file
!
For instructions, refer to your PC documentation.
If you're installing optional PictureTel Live network interface
boards, refer Appendix C or to the documentation provided
with those boards.
Checking and Configuring an EISA-Bus PC
A-5
Advertisement
Table of Contents
