Table of Contents
Advertisement
DEINSTALLING PICTURETEL LIVE
E-2
4. Delete these files:
C:\WINDOWS\PCS100.INI
C:\WINDOWS\VCSWIN.INI
C:\WINDOWS\*.PCS
5. Remove the PictureTel Live changes from the SYSTEM.INI file.
Use an editor to remove the changes from SYSTEM.INI,
following these steps:
a. In the
[BOOT]
COMM.DRV=C:\PCS\TDCOMM.DRV
by replacing
name. You will find this name in the
the line that begins
For example, if you find this line in the
StdCommDriver=COMM.DRV
then change the line in the
COMM.DRV=COMM.DRV
Or, if you find this line in the
StdCommDriver=JANCOMM.DRV
then change the line in the
COMM.DRV=JANCOMM.DRV
b. In the
[386ENH]
DEVICE=C:\PCS\PICTEL00.386
and similar lines, where 00 may be replaced with 01, 02, and
so on.
c. In the
[386ENH]
statement that corresponds to the PictureTel Live memory
address range:
EMMExclude
d. Entirely remove the section
[PICTEL00]
and similar sections, where 00 may be replaced with 01, 02,
and so on.
section, change the line
C:\PCS\TDCOMM.DRV
StdCommDriver=
[BOOT]
[PICTEL01]
[BOOT]
section, remove the line
section, remove the EMM EXCLUDE
with the original driver
section, on
[PICTEL01]
.
section
[PICTEL01]
section to
section
section to
Advertisement
Table of Contents
