Table of Contents
Advertisement
INSTALLING PICTURETEL LIVE SOFTWARE
Locating
PictureTel Live
Files
4-20
d. Attempt to start PictureTel Live.
If the Live application is still not working properly, then
refer to Chapter 5, Troubleshooting.
2. Check your Local Video window to make sure that you can see the
video image captured by your local video camera.
3. Choose Diagnostics from the Tools menu.
4. Click the Loopback button.
After a delay of several seconds the Loopback test begins.
Once the test begins, you should observe a delay of about one
second between moving and seeing the motion in your video
image, and between speaking and hearing your speech.
You can adjust the volume of the speaker using the scroll tool to
the left of the test mode video image.
5. Click the hangup (or end test) button.
If the Loopback test is unsuccessful, a message may be
displayed at the bottom of the remote video window.
6. Verify your Network connection. You should see the Ready
message displayed at the bottom of the remote video window.
If you see the "Network Down" message, then there is a
problem with the network. Refer to Chapter 5, Troubleshooting.
The PictureTel Live Setup program installs all but two PictureTel
Live files in the directory that you specified. For example, if you
accept the default directory, the Setup program installs the
PictureTel Live software in C:\PICTEL\PCS.
The Setup program installs these files in the C:\WINDOWS
directory:
PCS100.INI
!
VCSWIN.INI
!
Advertisement
Table of Contents
