Table of Contents
Advertisement
Overview
Configuration
Tips
The following technical tips will help you get the best results with
PictureTel Live and LiveShare Plus, especially on systems that have
slower processors and use many device drivers.
The following tips related to statements in your CONFIG.SYS,
SYSTEM.INI, and AUTOEXEC.BAT files:
Make sure your CONFIG.SYS file contains the following lines:
!
device=c:\dos\himem.sys
device=c:\dos\emm386.exe noems x=d000-d3FF
BUFFERS=30
FILES=40
dos=high,UMB
This assumes that you are using memory addresses D000-D3FF.
The number of buffers should be at least 30, and the number of
files at least 40.
Confirm that your SYSTEM.INI file also excludes the correct
!
memory areas. For example, if you are using addresses D000-
D3FF, it should contain these lines:
Device=D:\PCS\PICTEL01.386
EMMExclude=D000-D3FF
If there are additional exclusions for other devices, they must
also be excluded from the memory manager line of your
CONFIG.SYS file.
Make sure your AUTOEXEC.BAT and CONFIG.SYS files load
!
as many drivers into high memory as possible, in order to free
Performance Tips
H
H-1
Advertisement
Table of Contents
