Installing From A Lan - PictureTel LIVE50 Installation Manual

Installing from a
LAN
If you are installing PictureTel Live software in several Live systems
connected to a LAN, you can install the software from the LAN
rather than from disks. Just follow these steps:
1. Create installation directories on a convenient hard disk.
On a hard disk accessible to all the Live, create the directory
structure illustrated below.
VGA Video Drivers
Live 50 or 100
or
LiveShare Plus
Liveshare Plus
for Win 95
for Win3.1x
2. Copy the installation disks to the new directories.
Copy all the files from the first installation disk to the 1 directory,
from the second disk to the 2 directory, and so on.
3. Use these directories in place of the installation disks.
As you follow the instructions in the rest of this chapter, use the
directories in place of the installation disks.
For example, when you are ready to run the Setup program,
instead of using a pathname like
a:\setup
use one like
e:\live\1\setup

Installing from a LAN

E:\
VGA
Live
1
2
3
LivePlus
1
2
3
4-3