PictureTel LIVE50 Installation Manual page 85

Local Directory Numbers in these boxes. If you do not specify the
Local Directory Numbers for calls inside the United States and
Canada, you will not be able to receive calls.
In order to allow your Live system to respond only to those
incoming calls which are intended for it, you must specify the
MSNs or LDNs which will differentiate your Live from all other
terminals on the line.
10. In the next window you must specify the PC settings for the Live
board.
The default settings are:
Setting
IRQ
I/O port address
memory space address
Refer to Appendix A to check that these default settings do not
conflict with other settings already used in your PC.
Note: If you have trouble bringing up DOS and Windows
or starting up PictureTel Live after you install the
software, refer to Chapter 5, Troubleshooting, and
then run the Setup program again to manually
change the settings.
Write down the settings here for future reference:
IRQ: ______
I/O port address: __________________
Shared memory space address: __________________
The Setup program automatically selects the video input format
based on the country ISDN switch, either : PAL (Phase Alternate
Line) for Europe or NTSC (National Television Standards
Committee) for North America and Japan.
You can override the selection if the setup program selects the
wrong format.
Installing the PictureTel Live Application
Default
11
280
D000 through D3FF
4-17