Installation Requirements Outside Of The United States - PictureTel LIVE50 Installation Manual

Overview
Installation
Information
This appendix contains the following information:
BABT (British Approvals Board for Telecommunications)
!
requirements for installing the Live50 and Live100 (formerly
PCS 50 and PCS 100) boards in countries for which the pan
European approval applies.
AUSTEL requirements for installing the Live50 and Live100
!
(formerly PCS 50 and PCS 100) boards in Australia.
The following sections describe the BABT and AUSTEL
requirements that must be met for the approval to be valid.
The following statement describes the installation requirements for
BABT approval in the United Kingdom (not required for pan
European approval):
The PictureTel Live50 and Live100 boards are approved for
!
installation in a host, and with host attachments which are
either type approved for such apparatus, or, if supplied after
March 1, 1989, are marked with or supplied with a statement
that the host is supplied under General Approval Number
NS/G/1234/J/100003. (United Kingdom only.)
The following statements describe the installation requirements for
AUSTEL approval:
The PictureTel Live50 and Live100 boards shall only be
!
installed in a Personal Computer (PC) that complies with the
AUSTEL criteria of "Data Terminal Equipment" as defined by
the Telecommunications Act of 1991, Notice Under Section 267
(No. 1 of 1993).
Installation
Requirements
Outside of the
United States
G
G-1