Table of Contents
Advertisement
Adjusting Cameras
During a videoconference, you may need to adjust your cameras or the cameras at
the far-end site to show a different speaker or to zoom in or out on the people in
the meeting. (Remember that if your system uses Automatic Camera Pointing,
you donÕt need to manually adjust your cameras; the system will automatically
do it for you.)
To adjust your cameras with the wireless keypad:
Press POINT in the NEAR END section of the keypad to pan or tilt the camera or
press ZOOM in the NEAR END section of the keypad to zoom in or out.
(To adjust cameras at the far-end site, press
section of the keypad.)
Keep doing this until the camera shows the image exactly the way you want
it.
To adjust your cameras with the QuickPad:
1. Press NEAR END in the ADJUST section of the QuickPad.
(To adjust cameras at the far-end site, press
the QuickPad.)
2. Press POINT to pan or tilt the camera or press ZOOM to zoom in or out.
Keep doing this until the camera shows the image exactly the way you want
it.
To adjust a document camera, use the controls on the camera itself to zoom in,
zoom out, or focus. Or, you can pivot or move the document camera as needed to
show another object.
38
and
in the
POINT
ZOOM
in the
FAR END
ADJUST
FAR END
section of
Advertisement
Table of Contents
