Table of Contents
Advertisement
GETTING STARTED
Installing Over a Previous Version
About the 384 Kbps Option
1-8
6. Installing the PictureTel Live50 or Live100 software.
7. Testing the system.
If you are installing an optional Network Interface board
If you are installing an optional network interface board that allows
you to make the appropriate connections to your videoconferencing
network, refer to Appendix C for specific installation instructions.
If you are installing the 1.6 version of Live over an existing version
of a PictureTel PCS Live product, you need to know the following
information to complete the new installation:
IRQ setting and I/O port address of PCS 50 or PCS 100 Audio
!
Communications board [PICTEL00]
IRQ setting and I/O port address of any Network Interface
!
boards [PICTEL02, 03, ...]
Your Service Provider Identification (SPID) numbers
!
Your Multiple Subscriber Numbers (MSN), for switches outside
!
the USA and Canada that allow multiple terminals on a single
line
Run your current PictureTel Live Configure program to obtain this
information.
We also recommend that you backup your phone book (consisting
of both .pbk and .mdx files in the PCS directory) to preserve the
addresses you want to maintain from your previous version of Live.
If you are currently using the enhanced 384 Kbps option for
increasing the bandwidth beyond 128Kbps, no action is required
since this option remains in effect after upgrading to version 1.6.
If you are adding the 384 Kbps option that allows you to place a call
using a bandwidth speed beyond the normal 128 Kbps, there is an
extra installation step required to load the 384 software. The 384
Kbps option allows you to select a bandwidth speed between 128
and 384 Kbps.
Advertisement
Table of Contents
