Reconfiguring Memory (Optional Step) - PictureTel LIVE50 Installation Manual

INSTALLING PICTURETEL LIVE SOFTWARE

Reconfiguring Memory (optional step)

4-18
11. Specify a node name that identifies you and your PictureTel Live
system to the other party during videoconferences
The name can contain up to 32 characters and can include
spaces. You can use your own name or any other name to
identify yourself and your PC.
12. If you are installing the Live50 software, the setup program
performs an additional step and verifies your video board.
Note: This step is for the Live50 software installation only.
You have the option of accepting the video card Setup has
detected (Yes), or selecting another card by responding No and
initiating the board selection box dialog. We recommend you
accept the video card Setup has detected. If a problem occurs
you can choose another selection.
At this point, the basic installation is over and setup responds by
transferring the files from the installation disks to your hard drive
and giving you the option of modifying your config.sys file to
prevent an extended memory manager from using specific address
space reserved for Live operations.
If you are using an extended memory manager, such as EMM386
(which is shipped with Microsoft DOS or Windows) or a third party
manager, you need to configure the extended memory manager to
exclude the memory region that is used by your PictureTel Live
software.
The PictureTel Live Setup program allows you to edit the line in
your CONFIG.SYS file, which configures the extended memory
manager, by displaying an edit window in which you can make the
appropriate changes.
Note: If you are sure that you do not have an extended
memory manager installed in your PC, or if you are not
upgrading from a previous version of PictureTel Live
and have not changed the memory address, you do not
need to make the following change.
Be sure to refer to the documentation for the memory manager
installed in your PC for the exact syntax of the exclude statement