Connecting the
Speakerphone
Unit
Socket labeled 7
Socket labeled
Socket labeled
The PictureTel Live50 includes either an earpiece or an optional
speakerphone unit as its audio device.
To connect the speakerphone unit:
Do not connect or disconnect Live50 components when
your PC is on. Doing so may damage the Live50 hardware.
Plug one end of the speakerphone cable into the socket labeled
on the Live50 board as shown below, aligning the plug
7
carefully.
7
Note: If you are using the optional FlipCam camera, you
connect the plug labeled
Adapter cable plug that is also labeled
the FlipCam Adapter illustration on page 2-13.
Connecting the Speakerphone Unit
Caution
into the FlipCam
7
. Refer to
7
2-17