Table of Contents
Advertisement
INSTALLATION REQUIREMENTS OUTSIDE OF THE UNITED STATES
Power
Requirements
G-4
The following statements describe the power requirements for
BABT and AUSTEL approval.
The Live50 and Live100 boards are powered from the host chassis
and have the following power requirements per board:
Table G-3: Power Requirements
Voltage
+5V (+/-.25V)
+12V (+/-.5V)
The power drawn from the host chassis together with that required
for any other expansion boards and accessories must be within the
power rating of the host chassis.
The Live50 and Live100 boards must be installed in such a way that
the integrity of the network protection from hazardous voltages
used or generated internally by the host chassis is not impaired.
The clearance and creepage distances shown as X and Y in
Figure G-1 and as listed in Table G-4 must be maintained between
the Live50 or Live100 boards and:
The host chassis in which it is installed
!
Any adjacent expansion boards installed in the host chassis
!
Current (max.)
3.25A
.5A
Advertisement
Table of Contents
