PictureTel LIVE50 Installation Manual page 82

INSTALLING PICTURETEL LIVE SOFTWARE
4-14
5. Press enter (continue) to keep the default drive and directory or
change them to be compatible with your standards.
The Setup program creates the directory for the PictureTel Live
application and will later copy all but two files into this
directory. (See Locating PictureTel Live Files on page 4-20.)
If an existing version of Live is currently installed and this
directory already exists, the setup program allows you to
override it and continue the upgrade installation, choose a
different directory, or cancel this setup program.
After the directory path is confirmed, setup begins a dialog that
allows you to enter network interface informaton.
6. Setup displays the following window with the network interface
choices your PC will use for videoconferencing.
If you enabled ISDN, the dialog will ask you for the information
described in the following paragraphs.
If you enabled Switched 56, V.35, or RS-449, you will be asked
for the IRQ and I/O Port Address settings of the network
interface board you have previously installed. Then you can go
to Step 10.