Step2: Upgrading To The Powerdesk Driver; Step 3: Adjusting Desktop Area And Display Area - PictureTel LIVE50 Installation Manual

Step2: Upgrading to the PowerDesk Driver

From the Windows 95 installed MGA 1.0 driver, you need to
upgrade to the Matrox "PowerDesk" driver.
To complete the upgrade, follow these steps:
1. Insert the Matrox PowerDesk disk into Drive A:
2. From the Start Menu, run A:\SETUP.EXE
3. Confirm the installation path (C:\MATROX\MGA), or modify it, and
press Next.
4. Confirm the installation of both the MGA Monitor Program and
Quick Access by pressing Next.
5. If a message indicating that MGA.INF has been found is displayed,
respond Yes to the questions, "Do you want to use the Win95
monitor mechanism instead." If the MGA.INF could not be found,
press OK and continue.
Files will be copied to your hard disk.
6. A "wizard" leads you through the process of selecting the updated
MGA driver, using the standard Windows 95 Display Settings
dialog.
7. Restart the PC.

Step 3: Adjusting Desktop Area and Display Area

If the display area exceeds the desktop area ( for example, you need
to move the cursor to the edges in order to pan the display), you
need to perform the following steps:
1. Click on the Start button, point to Settings, and click on Control
Panel.
2. Double click on the Display icon.
3. Click on the MGA Settings tab page.
4. Set the Desktop area to match the Display area (for example, 1024
x 768).
5. Click OK to apply the changes.
Installing the VGA Driver
4-9