Verifying Your Installation - PictureTel LIVE50 Installation Manual

before modifying your CONFIG.SYS file. For example, if your
extended memory manager is EMM386, refer to your DOS manual
for the statement format.
The memory region which must be excluded begins at the address
you entered earlier in the installation. If you accepted the default
value, then the memory region begins at D000.
The address at which the memory region ends is the starting address
plus 3FF. If you accepted the default value, then the memory region
ends at D3FF.
For example, if you are using the EMM386 extended memory
manager, you must edit the line in your CONFIG.SYS file in which
EMM386 is configured to include the statement:
1. Edit your CONFIG.SYS file to add an exclude statement to the line
defining your extended memory manager.
2. Allow the Setup program to reboot your PC.
The Setup program automatically reboots your PC and restarts
Windows.
3. Once Windows has restarted, you may need to re-optimize your
system, using your extended memory manager's optimization
program.
For example, if you use EMM386, you now need to run the MS-
DOS 6.0 Memmaker program.
If Windows fails to restart correctly, you probably need to select
a different combination of IRQ, I/O, and memory address
settings. Refer to Chapter 5, Troubleshooting.

Verifying Your Installation

After installing PictureTel Live, you can run a simple test to confirm
that it is working properly.
1. Start PictureTel Live.
If you can't start PictureTel Live, follow these steps:
a. Exit Windows.
b. Turn your PC off, and then on.
c. Start Windows.
x=D000-D3FF
Installing the PictureTel Live Application
4-19