Overview
Changing
Settings on the
VGA Video Board
This appendix tells you how to change the IRQ setting and the
I/O port address settings on the Live100 boards. If you find conflicts
with any of the default settings on these boards when you check
your PC environment (as explained in Chapter 3), follow the
instructions in this appendix.
To change the I/O port address setting on the VGA Video board,
follow these steps:
1. Remove the board from its plastic antistatic package.
This board can be damaged by static discharge. To equalize
static charge, ground yourself by touching the metal back
panel of your PC.
Changing
Settings on the
Live100 Boards
Caution
B
B-1