INSTALLING NETWORK INTERFACE BOARDS
Inserting the Switched-56 Network Interface Board into the PC
C-12
For example, to set the address to 0240, set the switches like this:
0
Left
Or, to set the address to 03A0, set the switches like this:
0
Left
Record your I/O port address. You must specify it during software
installation.
To install the Switched-56 Network Interface board into the PC:
Turn off the computer and all peripheral devices before
performing the following procedures.
1. Select an expansion slot that is no more than one slot away from
the Live100 Audio Communications board, or the Live50 board.
2. Remove the filler plate on the expansion slot you have selected for
this board and save the screw.
3. Insert the board into an available ISA expansion slot.
4. Make sure the board is securely seated into the PC.
5. Secure it with the screw that held the filler plate.
1
2
3
4
5
6
4
2
1
2
3
4
5
6
A
3
Caution
Logical 0
Logical 1
0
Right
Logical 0
Logical 1
0
Right