Problems Bringing Up Dos And Windows - PictureTel LIVE50 Installation Manual

Table of Contents

Advertisement

TROUBLESHOOTING
Problems
Bringing Up DOS
and Windows
5-2
If Windows fails to start after you have installed PictureTel Live, you
probably need to select a different combination of IRQ, I/O and
memory addresses for the PictureTel Live system. Refer to
Appendix A "Checking Your PC Settings" for information on
choosing an appropriate combination.
PictureTel Live Setup modifies the SYSTEM.INI and WIN.INI files
in your Windows system directory. In order to restart Windows, you
will need to replace these files with their original versions. Do this
to restore the original versions which were saved by PictureTel Live
Setup:
1. Change to the directory containing your Windows system files.
Typically, this is:
C:\WINDOWS
2. Replace the new versions of the system files with the original
versions of the files, by entering the following commands:
COPY /Y SYSTEM.PCS SYSTEM.INI
COPY /Y WIN.PCS WIN.INI
3. Reboot your PC.
If you still encounter problems bringing up DOS and Windows,
refer to the instructions in Table 5-1 on page 5-3.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Live100

Table of Contents