Table of Contents
Advertisement
2.
Load paper face up until it stops, and then adjust both sides of the paper guide to match
the paper width.
2
1
• When using the bypass tray, it is recommended that you set the paper direction to .
• Letterhead paper must be loaded in a specific orientation.
• page 200 "Loading Orientation-fixed Paper or Two-sided Paper"
• You can load envelopes into the bypass tray. Envelopes must be loaded in a specific orientation.
• page 198 "Envelope Orientation and Recommended Status"
Specifying Regular Sizes Using the Control Panel
1.
Press [Settings] on the [Home] screen.
2.
Press [Tray Paper Settings].
3.
Press [Printer Bypass Paper Size].
4.
Select the paper size.
5.
Press [OK].
6.
After completing the procedure, press [Home] (
2
EAT331
Loading Paper into the Paper Tray
).
187
Advertisement
Table of Contents
