Calling An Individual Station - Icom ID-31E PLUS Basic Manual

■ Calling an individual station

You can make a call to an individual station when the station
call sign is selected in "TO" (Destination).
When you call an individual station through a gateway, your
call is automatically sent to the last repeater that the station
accessed. So, even if you don't know where the station is,
you can make a call using Call Sign Routing.
Step 1: Set "FROM" (Access repeater)
L Same as described in page 48.
Step 2: Set "TO" (Destination)
1. Push [RX→CS] to select "TO," then push [ENT].
2. Select "Your Call Sign."
[Up]
[ENT]
[Down]
3. Select your destination station.
• Returns to the DR screen, and the selected station name is
displayed in "TO."
Step 3: Hold down [PTT] to transmit.
• The TX/RX indicator lights red while transmitting.
D-STAR OPERATION
( Example: The destination
station is set to "Rick.")
D-STAR GUIDE
50