Vfo And A Priority Channel; Vfo Frequency And A Priority Channel; Vfo Scan And A Priority Channel - Icom i2730A Instruction Manual

■ VFO and a Priority channel

D VFO frequency and a Priority channel
Checks the selected Priority channel every 5 seconds, while
receiving on a VFO frequency.
Set the VFO frequency. (p. 24)
q
Set the Priority channel. (p. 29)
w
• Select a Memory channel, Bank channel or Call channel.
Push [MENU ]C.
e
• Enters the MENU mode.
r Rotate [DIAL]S to select "PRIO" (Priority scan).
Push [ ï]D.
t
Rotate [DIAL] S to select "ON" or "Bell."
y
• ON: Starts Priority Watch.
• Bell: Starts Priority Watch.
When a signal is received on the Priority channel,
the " " icon appears on the display.
ï]D.
Push [
u
Push [MAIN BAND]
i
S.
• Exits the MENU mode.
• The "PRIO" icon appears, and the Priority watch starts.
• To cancel the Priority watch, select "OFF" in step y.
Example: Checks Memory channel "11" while receiving on
433.920 MHz.
Checks the Memory channel every 5 seconds.
D VFO scan and a Priority channel
Checks the selected Priority channel every 5 seconds, during
a VFO mode scan.
Do steps q through i as shown to the left.
q
• The "PRIO" icon appears, and the Priority watch starts.
Hold down [V/MHz SCAN]
w
Rotate [DIAL] S to select a desired scan type.
e
Push [V/MHz SCAN]
r
S.
• The VFO scan starts.
PRIORITY WATCH
Appears
Priority
channel
S for 1 second.
6
6
46