Dv Memory Items - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN

DV Memory items

Your Call Sign
MENU > DV Memory > Your Call Sign
The transceiver has up to 200 memories to save
individual station call signs�
The saved call sign and name are displayed on the
YOUR CALL SIGN or RX HISTORY screen�
L You can enter the Your (UR) Call Sign into the memory
using the RX History� (BASIC MANUAL Section 11)
L To add, edit, or move the Your Call Sign in the memory,
see pages 4-41 ~ 4-42 for details�
Repeater List
MENU > DV Memory > Repeater List
You can save repeater information for quick and
simple communication when using repeaters�
The transceiver has up to 750 repeaters that can
saved in 30 groups�
You can save "DV Repeater," "DV Simplex," "FM
Repeater," and "FM Simplex" information in the
repeater list�
NOTE: For easy operation, a repeater list is
preloaded into your transceiver� However, if the
CPU clears all entered contents (All Reset), the
repeater list is also cleared� We recommend that
memory data be backed up using a microSD card,
or be saved to a PC using the CS-31PLUS
�
software
TIP: About the repeater list
The repeater list can be downloaded from the Icom
website�
http://www.icom.co.jp/world/support/download/firm/
Repeater Group (01 ~ 30)
Group name
L You can set the Skip setting� (p� 4-39)
Repeater List
Depending on the type, the displayed items differ�
L The TYPE order is different from actual display�
<TYPE: DV Repeater>
TYPE
NAME
SUB NAME
CALL SIGN
GW CALL SIGN Gateway call sign
GROUP
USE (FROM)
FREQUENCY*
DUP* 1
cloning
OFFSET FREQ*
POSITION
LATITUDE*
LONGITUDE*
UTC OFFSET
* 1 Set these items when USE (FROM) is set to "YES�"
* 2 Displayed when POSITION is set to "Approximate" or
"Exact�"
11-23
Repeater group name of up to 16
alphanumeric characters
DV repeater
Repeater name of up to 16
alphanumeric characters
Repeater sub name of up to 8
alphanumeric characters
Repeater call sign
Repeater group where the repeater
is assigned
Select whether or not to use the
repeater as an Access repeater
(FROM) in the DR screen�
Operating frequency of the Access
1
repeater
Duplex setting to use the Access
repeater
Frequency offset to use the Access
1
repeater
Position data accuracy level
("None," "Approximate," or "Exact")
2 Latitude position of the repeater
2 Longitude position of the repeater
Time difference between UTC
(Universal Time Coordinated) and
the local time