Show Ethernet Cfm Maintenance-Points Remote Crosscheck; Ethernet Cfm Linktrace Cache - Edge-Core ECS4810-12M Layer 2 Management Manual

| CFM Commands
C 41
HAPTER
show ethernet cfm
maintenance-points
remote crosscheck
ethernet cfm
linktrace cache
The cross-check process is disabled by default, and must be manually
◆
started using this command with the enable keyword.
E
XAMPLE
This example enables cross-checking within the specified maintenance
association.
Console#ethernet cfm mep crosscheck enable md voip ma rd
Console#
This command displays information about remote MEPs statically
configured in a cross-check list.
S
YNTAX

show ethernet cfm maintenance-points remote crosscheck

[domain domain-name | mpid mpid]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
mpid – Maintenance end point identifier. (Range: 1-8191)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This example shows all remote MEPs statically configured on this device.
Console#show ethernet cfm maintenance-points remote crosscheck
MPID MA Name
---- --------------------
2 downtown
Console#
This command enables caching of CFM data learned through link trace
messages. Use the no form to disable caching.
S
YNTAX
[no] ethernet cfm linktrace cache
D S
EFAULT ETTING
Disabled
– 1122 –
Level VLAN MEP Up Remote MAC
----- ---- ------ ------------------
4 2 Yes 00-0D-54-FC-A2-73