Steering Lock - Otto Bock C1000 SF Instructions For Use Manual

→ The key symbol on the LCD screen indicates that the drive-away lock is activated:
Display
Deactivating the drive-away lock
1) Push the [On/Off] button on the control panel.
→ The control unit is turned on. The LCD screen indicates that the drive-away lock is activated.
2) Push the joystick all the way forward until a beep sounds.
3) Push the joystick all the way back until a beep sounds.
4) Release the joystick.
→ A long beep confirms that the driving function is enabled.
→ The battery indicator and speed level are shown on the LCD screen.
→ The drive-away lock is deactivated and driving is enabled.
Activating the drive-away lock via separate LCD monitor
If a special control is used, then the drive-away lock is activated via the separate LCD monitor.
1) Select Settings Menu > Additional functions Submenu (--- FEHLENDER LINK --- ff.).
2) Activate the function by moving the joystick.
→ A beep confirms that the function was activated.
→ The control unit turns itself off.
→ The key symbol on the separate LCD monitor indicates that the drive-away lock is activated:
Display
Deactivating the drive-away lock via separate LCD monitor
1) An information screen is shown on the LCD monitor after the power wheelchair is switched on (see previous
table).
2) Deactivation is carried out as described in "Deactivating the drive-away lock".
Troubleshooting
The drive-away lock remains active if the joystick is not moved correctly.
1) Turn the control unit off in order to deactivate the drive-away lock again.
2) Turn the power wheelchair on.
3) Deactivate the drive-away lock again.

6.8.8 Steering lock

INFORMATION
The steering lock can only be activated as described below if the function was previously enabled (see inside
front cover). The factory default setting can be changed by the specialist dealer.
Please ask your specialist dealer about the setting selected for you.
The enAble50 control unit in the power wheelchair may be programmed with the optional "Steering Lock" paramet­
er.
If the steering lock is activated, the caster wheels are set straight ahead. This makes it easier to negotiate narrow
ramps and to use lifts:
• When the joystick is deflected forward, the power wheelchair always drives straight ahead.
• When the joystick is deflected backward, the power wheelchair always drives straight back.
• Turning is not possible when the steering lock is activated.
• The warning flasher lights flash when the steering lock is activated (standard programming).
Activating the steering lock
1) Bring the power wheelchair to a full stop.
C1000 SF
Information
Drive-away lock
Information
Drive-away lock
Use
29