Copying Using Special Paper (Multi-Sheet Bypass Tray) - Oce CS520 User Manual

Copying Using Special Paper (Multi-Sheet Bypass Tray)

Copying Using Special Paper
(Multi-Sheet Bypass Tray)
Use the Multi-sheet bypass tray to copy using special (non-standard) paper.
Select the special paper type and weight from the selections previously specified by
the Key Operator, then select the size to be loaded on the Multi-sheet bypass tray,
as described below.
Transparency cannot be used on this machine. DO NOT load the
transparencies into the Multi-sheet bypass tray.
• 8.5"x11"R and B6R sizes (unavailable in Tray 1 to 4) can be used in the
Multi-sheet bypass tray. Also, 210~256 g/m
Multi-sheet bypass tray.
• To specify the combinations of special paper type and weight to be
selected for the Multi-sheet bypass tray, see p. 14-422.
• To specify the special paper type, weight and size in Tray 1 to 4 to be used
on a regular basis, see p. 14-420.
1. Open the Multi-sheet bypass tray, and load the copy paper.
See p. 2-59 for further details of loading procedure.
For the specifications of paper in the Multi-sheet bypass tray, see p. 12-362.
2. Touch the Multi-sheet bypass tray key in the PAPER SIZE area of
the Basic Screen to highlight it.
The TYPE/SIZE
deselected, and
TYPE/SIZE
3. Touch
The Paper Type/Size popup menu will be displayed.
3-86
key will appear under the bypass tray key,
AMS
will be highlighted on the Basic Screen.
.
2
paper can be used in the
APS will be