Oce CS520 User Manual page 135

The timing to enter the Interrupt mode varies according to the job in progress
on the machine when [
See the following page.
In Reserve mode, pressing [
scanning the reserve job originals clears the settings selected for the reserve
job.
For details of Reserve mode, see p. 3-106.
2. Set copy conditions, as desired.
The initial settings in Interrupt mode are as follows.
Colour Mode
Copy Mode
RADF
AE
Lens Mode
APS
Print Quantity
Finisher
Remove any document from the platen glass or from the document feeder, if
present.
3. Position original(s).
See p. 3-70 for details on positioning originals.
START
4. Press [
CHECK
When [
displayed reflects the initial copy job settings. Check mode will not display
Interrupt copy job information.
INTERRUPT
INTERRUPT
:Full Colour
: 1)1
: ON
: ON
: 1.000 (100%)
: ON
: 1
: Sub Tray
] to start the interrupt copying.
] is pressed during Interrupt copying, the information
Interrupt Copying
] is pressed.
] before the copier finishes
4-135