Table of Contents
Advertisement
Selecting Paper Size
To Specify Desired Paper Size (AMS)
When a paper size is specified on the touch screen, an appropriate reduction or
enlargement ratio will be selected automatically according to the original size
detected from the RADF or the platen glass.
Wide paper size can be specified when AMS is in use.
In this case, the same magnification ratio as that of the standard size will be
selected automatically.
1.
Touch a tray key on the Basic Screen to select the desired paper
size.
Selected tray key will be highlighted, and under the LENS MODE the
will also be highlighted.
If copying in 1.000 (100%) magnification mode and specifying a paper size,
see p. 3-91.
2.
Select additional copy conditions, as desired.
3.
Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
4.
Position original(s).
• See p. 12-370 for the original sizes detectable from the RADF or on the
platen glass.
• See p. 3-70 for details on positioning originals.
START
5.
Press [
Scanned image will be printed on the specified paper size in the magnification
ratio automatically selected.
3-84
].
AMS
key
Advertisement
Table of Contents
Troubleshooting
