Programming Different Settings For An Output Job (Program Job) - Oce CS520 User Manual

Programming Different Settings for an Output Job
Programming Different Settings for an Out-
put Job (Program Job)
In the ordinary Store mode, the combined features selected for the job are applied
to all originals to be scanned. In the Program Job mode, you may scan multiple sets
of originals and apply different settings on each set (referred to as JOB), then output
them all as a complete set.
Specifications for Program Job
/ Max. 100 JOBs can be programmed for an output job.
/ Once specified, paper size and the paper type/size setting for Multi-sheet
bypass tray cannot be changed for another JOB.
/ Output mode and print quantity setting cannot be specified for each JOB.
The last setting made will be applied to all JOBs.
/ Program Job settings cannot be stored in Job Memory.
/ Incompatible Conditions: APS, Change paper size, Group, Rotation Sort,
Rotation Group, Fold, Stitch & Fold, Trimming, Mixed Original, Sheet/Cover
Insertion, Chapter, Combination, Booklet, Image Insert, Dual Page, Multi-
Page Enlargement, 2/4/8 Repeat in Repeat, Overlay, Storing Image in Overlay
Memory
Original A
APPLICATION
1. Touch
When starting a new copying job, be sure to close the RADF securely, then
press [ AUTO RESET
Original B Original C
on the Basic Screen.
].
Copied set
11-313