Oce CS520 User Manual page 458

[25] Printer Gamma Sensor Adjustment
5 Touch the Start
automatically.
NOTE:
If no paper is left in the Multi-sheet bypass tray, the adjustment will not start
even if the
The message "Completed" will be displayed when the adjustment is completed
normally.
NOTE:
If an error code (Error 1, 2, or 10) is displayed, check that the test chart is
placed properly.
If any other error code is displayed, please contact your service
representative.
6 Repeat the steps
PREVIOUS SCREEN
7 Touch
14-458
key on the screen. The machine starts the adjustment
Start
key is touched.
2 to 5 as desired.
to restore the Key Operator Mode Screen.