Table of Contents
Advertisement
Reducing Images to Create Binding Margin (Reduce&Shift)
1.
Select the copy mode and paper size, as required.
APPLICATION
2.
Touch
When starting a new copying job, be sure to close the RADF securely, then
press [
AUTO RESET
Image Shift
3.
Touch
REDUCE&SHIFT
4.
Touch
specify the shift direction and amount.
Touch
FRONT
appears dimmed to show inactivity.
Touch to highlight the desired shift direction key, then use the touch screen
keypad or up/down arrow key to enter the desired shift amount, from 0 to 250
mm in 1 mm increments.
The image display on the screen allows you to view the shift direction and
amount to be printed on the printed sheets.
The AMS will automatically determine the magnification ratio according to the
shift amount specified for the front page. The shift amount and magnification
ratio determined for the front page will be automatically applied to the back
page. If any positioning adjustment is required, touch
direction and amount change.
on the Basic Screen.
].
on the Application Selection Screen.
on the Image Shift Setting Screen, then
or
BACK
. In Reduce & Shift mode, the
BOTH SIDES
key
BACK
and make
11-339
Advertisement
Table of Contents
Troubleshooting
