Recalling Previous Job Settings - Oce CS520 User Manual

Recalling Previous Job Settings

Follow the procedure below to copy with a previous job's settings.
• Only the last-completed output job settings can be recalled as the
previous job settings. Non-complete job or reserve job settings cannot be
recalled, even if the setting operations have been made last.
• The previous job settings can be recalled, even after the machine power is
turned off then on.
JOB MEMORY
1. Press [
The Job No. Selection Screen will be displayed.
PRE-JOB RECALL
2. Touch
JOB CHECK
The
RECALL on the screen
JOB CHECK
3. Touch
Check the settings of the previous output job.
OK
4. Touch to return to the Basic Screen.
The settings of the previous output job is recalled on the screen.
5. Change the settings recalled on the screen, if desired.
6. When all settings are acceptable, position original(s) in the
document feeder or on the platen glass, then press [

Recalling Previous Job Settings

] on the control panel.
.
key will be displayed between
to display the Job Check Screen.
STORE PRE-JOB
and
START
].
4-141