Oce CS520 User Manual page 113

Specification for Output Modes without Finisher
/ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Chapter,
Combination, Booklet, Image Insert, Program Job, Repeat, AUTO Layout,
Non-Image Area Erase, Stamp (Numbering)
/ Incompatible with Rotation Group mode: Proof Copy, Mixed Original, Z-
Folded Original, Non STD Size (FULL AREA), Sheet/Cover Insertion, Chapter,
Combination, Booklet, Image Insert, Dual Page, Program Job, Repeat, AUTO
Layout, Non-Image Area Erase, Stamp (Numbering), Overlay
/ Incompatible with Rotation Sort mode: Mixed Original, Sheet/Cover Insertion,
Booklet, Repeat, AUTO Layout, Non-Image Area Erase
1. Load copy paper.
When using Rotation sort or Rotation group mode, load the same paper size
into two trays in different orientation.
• Do not release the Rotation function.
• When starting a new copying job, be sure to close the RADF securely, then
press [
2. Select the desired output mode.
To select Face down non-sort mode:
Confirm that
Face down non-sort mode is initially selected. Key Operator can change the
initial output mode. See p. 14-409.
Output Mode for Machine without Finisher
AUTO RESET
].
OUTPUT MENU is not highlighted on the Basic Screen.
3-113