To Display Application Selection Screen - Oce CS520 User Manual

To Display Application Selection Screen

To Display Application Selection Screen

Follow the procedure below to display the Application Selection Screen and select
the desired copying features.
APPLICATION
1. Touch
The Application Selection Screen will be displayed on the touch panel.
• When a function key is touched, it becomes highlighted. If you touch a
function key, another screen or two will display to enable you to enter the
appropriate settings.
• Check
desired, so that the screen may be directly accessed from the Check
Screen to change the setting you made.
• If one function on the menu is incompatible with another, it will appear
dimmed.
• The APPLICATION
application selections have been made.
To restore the original copying conditions, touch
To clear all Application settings, touch
OK
2. Touch on the Application Selection Screen.
Selections will be completed and the Basic Screen will be restored.
11-288
on the Basic Screen.
BOOK MARK
in the message area of the subsequent screen, if
key on the Basic Screen will be highlighted when
CANCEL
ALL CLEAR
.
.