Off-Line Finishing - Oce CS520 User Manual

Off-Line Finishing

The Off-Line Finishing function enables you to finish documents independent of
copier operation. The Off-Line Finishing function is available only with the Cover
Sheet Feeder option (PI-110) installed on the FS-513/FS-606 Finisher. To use this
convenient function, simply place a set of paper into the lower tray of the cover
sheet feeder, select the desired mode from the Off-Line Finishing operation panel
located on the top of the finisher, then press the Start/Stop button.
Available finishing modes according to the optional configuration are described
below.
FS-513 Finisher + PI-110 Cover Sheet Feeder
- 1 oblique staple: Primary (main) tray
- 2 parallel staples: Primary (main) tray
FS-513 Finisher + PI-110 Cover Sheet Feeder + PK-507/PK-508 Punching Kit
- 1 oblique staple
- 2 parallel staples
- Punch
FS-606 Finisher + PI-110 Cover Sheet Feeder
- 1 oblique staple
- 2 parallel staples
- Stitch & Fold (2 staples in the centre + Fold)
- Three-Fold
FS-606 Finisher + PI-110 Cover Sheet Feeder+ PK-507/PK-508 Punching Kit
- 1 oblique staple
- 2 parallel staples
- Stitch & Fold (2 staples in the centre + Fold)
- Three-Fold
- Punch
Specifications for Manual Stapling 1 oblique staple and 2 parallel
staples
/ Paper size: A3, B4, A4, A4R, B5, B5R, A5*, 12"x18", 11"x17", 8.5"x14",
8.5"x11", 8.5"x11"R
*A5 paper is available in portrait type feeding only.
/ Paper weight: 50 ~ 80 g/m
/ Staple capacity: 50 sheets max.
49 sheets max. with a thick (200 g/m
/ Output tray: Primary (main) tray
Specifications for Manual Punch
/ Paper size: A3 to B5
/ Paper weight: 50 ~ 128* g/m
*Some paper types may not be punched easily.
/ Tray capacity: 200 sheets max. (200 g/m
/ Output tray: Primary (main) tray
2
2
paper) front cover
2
2
paper) or within 30mm thick

Off-Line Finishing

8-233