Ip Address Setting - Oce CS520 User Manual

[1] System Initial Setting

[3] IP Address Setting

This setting is required to enable a PC to gain access to this machine. Set the line
speed, if required.
NOTE:
Consult your network manager to perform this setting. Incorrect setting may
cause a trouble with other network systems.
System Initial Setting Menu Screen
IP Address Setting Screen (next page)
Procedure
1 Touch [1] System initial setting
Screen.
2 Touch [3] IP address setting
3 Make the required setting.
(1) Touch to highlight the address key on the left. To scroll to the next page,
touch the arrow key at the lower left corner on the screen.
(2) Enter the address numbers using the screen keypad.
(3) Touch SET
the cursor to the right.
4 Customize the line speed.
(1) Touch Line speed setting
(2) Touch the desired key to highlight it.
(3) Touch OK
5 Touch OK to complete the setting and return to the System Initial Setting Menu
Screen, or touch
6 Touch PREVIOUS SCREEN
14-406
to display the System Initial Setting Menu
to display the IP Address Setting Screen.
to fix the numbers, or touch
to display the Line Speed Setting Screen.
to restore the IP Address Setting Screen.
CANCEL to restore the previous setting.
to restore the Key Operator Mode Screen.
IP Address Setting Screen
Line Speed Setting Screen
RESET to clear. Touching SET shifts