Oce CS520 User Manual page 132

Checking Feature Selections / Proof Copying (Check Mode)
4. To change the settings:
Touch the desired copying condition key on the Check Screen to highlight it.
Any key that cannot be highlighted indicates that the copying condition cannot
be changed from the Check Screen.
Touch CHANGE SETTING
The LCD will display an appropriate screen to change the copying condition
selected.
• Selecting a basic copying condition key will display the Basic Screen.
• Selecting a Special Original Mode key will display the Special Original
popup menu.
• Selecting an Image Adjust Mode key will display the Change Image
Adjustment Setting Screen.
When
selecting the mode key will jump to that screen.
• Selecting an Application Mode key will display the Change Application
Selection Screen.
When
selecting the application function key will jump to that screen. See p. 11-
288 for details.
CHANGE SETTING
•
functions, however they can be released by touching
SETTING
Layout, Overlay.
Change the setting as desired, then restore the Check Screen to return to the
checking steps.
From the Basic Screen, press [
From the Special Original popup menu, Change Image Adjustment Setting
Screen or Change Application Selection Screen, touch
Check Screen.
• When making a set or sample copy, proceed to step
• To start printing without proofcopying, proceed to step
5. To release the settings:
Touch the desired copying condition key on the Check Screen to highlight it,
then touch RELEASE SETTING
The confirmation screen will appear on the Check Screen.
Touch YES to cancel the function, or
• If making a sample copy, proceed to the next step.
• To start printing, proceed to step
4-132
.
BOOK MARK
has been checked on a subsequent screen,
BOOK MARK
has been checked on a subsequent screen,
will not function for the following application
: Program Job, Non-Image Area Erase, Reverse Image, AUTO
CHECK
.
] to return to the Check Screen.
NO to restore.
8 .
RELEASE
OK to return to the
6 .
8 .