Oce CS520 User Manual page 296

Locating Title Pages on the Right Side (Chapter)
To change the selection of paper tray for copying title pages, touch
INSERT
to change the currently selected paper tray displayed on the screen.
4. When all entries are made, touch
The Application Selection Screen will be restored.
5. Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
7. Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-70.
• Use RADF store mode (p. 3-104) when the original count exceeds 100.
START
8. Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
11-296
on the screen. In this case, you can touch
].
CHANGE OF THE TRAY
OK
.
COPIED