Oce CS520 User Manual page 307

Inserting Images into Printed Sets (Image Insert)
Touch Booklet
function.
4. When all page number entries are made, touch
The Application Selection Screen will be restored.
OK
5. Touch on the Application Selection Screen.
The Basic Screen will be restored.
STORE
The key on the Basic Screen appears highlighted to show that the
Store mode is automatically selected.
6. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
7. Scan the document feeder images:
Position originals FACE UP in the document feeder.
If the number of originals exceeds 100, divide them into blocks not exceeding
100 sheets and load them from the block with the first page.
START
8. Press [
The originals positioned in the document feeder will be scanned into memory.
9. Scan the platen glass images.
Open the document feeder.
Position an original FACE DOWN on the platen glass, then close the document
feeder.
PLACE AND SCAN THE ORIGINALS IN ORDER.
START
10. Press [
11. Repeat steps
• Memory overflow may occur during scanning. See p. 5-157.
• Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in your
machine.
STORE
12. Touch
START
13. Press [
The copier will start printing when ready for output.
on the Image Insertion No. Setting Screen to use this
].
].
9 10
and for all originals.
to exit the Store mode.
].
OK
.
11-307