Oce CS520 User Manual page 136

Interrupt Copying
5. When Interrupt copying is completed, press [
The [ INTERRUPT
Screen returns to the
The settings of the initial job will be restored on the Basic Screen.
START
6. Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
For particular jobs in progress, copying will cease only after certain phases of
the immediate operation are completed, as indicated by the [
LED conditions described below.
• Collectively printing image stored in memory
The LED blinks until one set of the current job is printed.
Then the LED remains steady for the temporary job performed in Interrupt
mode.
• Scanning originals into memory
The LED blinks until scanning is completed for all originals placed in the
document feeder.
Then, the LED remains steady for the temporary job performed in Interrupt
mode.
• Scanning originals into memory while printing in Reserve mode
The LED blinks until the copier completes the current printing job, scans
all originals placed on the document feeder, and prints one set of the
Reserved job.
The LED remains steady for the temporary job performed in Interrupt
mode.
4-136
] LED turns out and the
JOB indicators.
] to resume copying.
INTERRUPT
INTERRUPT indicator on the Basic
] again.
INTERRUPT
]