Oce CS520 User Manual page 122

Output Mode for Machine with Finisher
7. Enter the desired print quantity from the control panel keypad.
See p. 12-365 to be sure that the finisher capacity is not exceeded.
See p. 3-76 for details on setting print quantity.
8. Position original(s).
See p. 3-70 for details on positioning originals.
START
9. Press [
STOP
Press [
Finisher primary (main) tray of Finisher FS-513/FS-606 gradually goes down
while printed materials output. DO NOT allow any object to interfere with the
operation of the tray on the left side of the finisher, as any interference may
cause damage to the finisher.
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
3-122
].
] to suspend the scanning or printing job. See p. 3-81 for details.