Oce CS520 User Manual page 315

Programming Different Settings for an Output Job
8. Repeat steps
PLACE AND SCAN EACH ORIGINAL SET IN THE CORRECT ORDER OF
PAGINATION.
• Memory overflow may occur during scanning. See p. 5-157.
• Should memory overflow occur frequently, it is recommended that you
contact your service representative to expand the memory capacity in
your machine.
9. Select the desired output mode and enter the print quantity from
the control panel keypad.
See p. 3-76 for details on setting print quantity.
STORE
10. Touch
START
11. Press [
When the finisher / paper exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
4 7
to until all JOB originals are scanned.
to exit the Store mode.
].
11-315