Oce CS520 User Manual page 442

[13] Memory Switch Setting
[47] Screen (MonoColour - Text/Photo)
Specify the initial state of the SCREEN setting in Single Colour mode with Text/
Photo specified in Special Original setting.
[48] Screen (MonoColour - Photo)
Specify the initial state of the SCREEN setting in Single Colour mode with Photo
specified in Special Original setting.
[49] Colour gamut
Specify the latitude of the colour in printing images.
NOTE:
Wide
• If
image.
• If the printer controller version is 1.0, be sure to select
making calibration on the printer controller.
When the calibration is completed, be sure to resume the previous setting.
With the other version of the printer controller, this setting si not required.
[50] Auto select binding mode
Set the binding mode of printed sets automatically to match with the original
binding mode when specified on the Special Original Screen.
[51] State of Platen/RADF (Reset)
When Auto Reset functions, select to reset the Platen/RADF mode to the initial
setting, or save the previous setting.
[52] Time lag to switch tray
Specify the time-lag required when switching the paper tray to change the paper
type and size while or after copying/printing. If any printed image shows uneven
brightness or coated paper blisters at the time about 10 printed sheets are
delivered, select Standard to let the machine have sufficient time for the fixing heat
adjustment.
[53] Printer Non STD centring
In printer mode, the machine automatically centres the scanned image, so that the
image overreaching the maximum print area (323 mm x 485 mm) can be printed
without image loss.
[54] SCAN E-Mail Form default
Select the file form when transmitting the scanned image data.
[55] SCAN FTP Form default
Select the file form when storing the scanned image data in the FTP server.
[56] LCT air assist fan
Set the machine to blow on thick paper while feeding it.
[57] Exit cooling fan (No finisher)
When the finisher is not installed, set the machine to use fan to dry printed sheets to
prevent sheets from sticking together.
[58] Finisher operating (Thick)
With a finisher installed, the machine is initially set to prefer copy speed to image
quality. To improve image quality, use this setting to specify "Prefer Image Quality".
14-442
is selected, a blur may appear in high density area of the printed
Wide
before