Oce CS520 User Manual page 49

A few seconds after the Wake-up Screen appears in the LCD touch screen,
seven types of Warm-up Screens will be displayed in succession for approx.
7.0 minutes.
You can set reserve jobs while the machine is warming up. Touch the LCD
screen to change the Warm-up Screen to the Basic Screen, then check that
the message "Ready to copy reserve" is displayed on the Basic Screen. See
p. 3-78.
3. The Basic Screen will be displayed.
The message on the Basic Screen will inform you that copying job is now
available.
• When the initial settings are changed by the Key Operator, the modified
conditions will be displayed on the Basic Screen.
• When "Enter E.K.C. password" is displayed, enter your password to use
the machine.
• When "Set the key counter" is displayed, insert the key counter to its inlet
on the right side of the main body.
Turning On the Power Switch
2-49