Oce CS520 User Manual page 345

Printing Stamp, Page, Date/Time onto Copies (Stamp)
9. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
10. Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
For details on positioning originals, see p. 3-70.
START
11. Press [
When the finisher / trimmer unit / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
Fine Adjustment Setting Screen
When FINE ADJ. OF POSITION
Screen will be displayed.
Touch TOP SIDE, BOTTOM SIDE
direction, then use the touch screen keypad or up/down arrow key to enter
the desired amount, from 0 to 50 mm. Touch
screen.
Starting No. Setting Screen: Available from SET NUMBERING or
WATERMARK NUMBERING
Use the touch screen keypad or up/down arrow key to enter the desired
starting number, then touch
].
OK
is touched, the Fine Adjustment Setting
, RIGHT SIDE , or
OK to return to the previous
to return to the previous screen.
LEFT SIDE to specify the
11-345