Oce CS520 User Manual page 293

Inserting Sheets and Covers (Sheet/Cover Insertion)
8. When all settings are completed, touch
Application Selection Screen.
The Basic Screen will be restored.
9. Enter the desired print quantity from the control panel keypad.
See p. 3-76 for details on setting print quantity.
10. Position originals FACE UP in the document feeder.
• For details on positioning originals, see p. 3-70.
• Use RADF store mode (p. 3-104) when the original count exceeds 100.
START
11. Press [
When the finisher / paper exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
].
OK
to return to the
11-293