Loading Paper In Lct (Lt-211) - Oce CS520 User Manual

Loading Paper

Loading Paper in LCT (LT-211)

Be sure to load only the paper type and weight set for the LCT. Key Operator
can change this setting. See p. 14-420.
1. Open the LCT top door.
The LCT bottom plate will go up.
Without the power turned on, the LCT bottom plate will not function. Be sure
to turn on the power switch before loading paper in the LCT.
To load the same size as loaded before, proceed to step 3 .
If changing the paper size, proceed to the next step.
2. Adjust the position of the LCT paper guides and rear stopper.
(1) Turn the four LCT paper guide knobs and two rear stopper knobs
counterclockwise to loosen them.
2-60