Loading Tabbed Sheets In Multi-Sheet Bypass Tray - Oce CS520 User Manual

Loading Tabbed Sheets in Multi-Sheet Bypass Tray

Front
The tab extension width must be 12.5 mm or less.
1. Open the Multi-sheet bypass tray located on the right side of the
copier.
2. Load tabbed sheets as illustrated above.
3. Adjust the paper guides to the paper size.
4. Specify the paper type as TAB for the Multi-sheet bypass tray.
See p. 3-86 for specifying the paper type of the Multi-sheet bypass tray.
Example: 3 Tabbed sheets loaded in position for one finished set.
Rear
Printed
side
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
Rear
Printed
side
1st TAB
2nd TAB
3rd TAB
ONE FINISHED SET
1st TAB 2nd TAB
1st TAB
2nd TAB
3rd TAB
THREE FINISHED SETS
Loading Paper
1st TAB
2nd TAB
3rd TAB
3rd TAB
2-65